t a  e 
参考号 零件 参数
CENTRIC : 61040045 Ball Joint
  • Adjustable: No
  • Bushing Material: Poly
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Greasable: No
  • Grease Fitting Included: No
  • Maximum Outside Diameter: 40.5 mm
  • Mount Plate Included: No
  • Mounting Bolts Included: No
  • Mounting Hardware Included: Yes
  • Mounting Type: Press-in
  • Nuts Included: No
  • Stud Tapered End 1 Diameter: 17.5 mm
  • Stud Thread Length: 15.5 mm
  • Stud Type: Threaded
  • Tapered Stud: Yes
  • Washers Included: No
TRW : JBJ505 Ball Joint
DELPHI : TC5355 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Color: Gray
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Height (IN): 3.055
  • Height (MM): 77.6
  • Material: Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040
  • Mount Plate Included: No
  • Mounting Hardware Included: Yes
  • Mounting Type: Pressed
  • Nuts Included: No
  • Position(s): Front Lower
  • Stud Thread Diameter (IN): 0.55
  • Tapered Stud: No
  • Washers Included: No
  • Width (MM): 46.8
MEVOTECH : MS60512 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Type: Press In
MOOG : K500192 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Maximum Outside Diameter: 1.880 in
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press-in
MCQUAY-NORRIS : FA10016 Ball Joint
FVP : BJ59395 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 43.5 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Pressed
  • Package Contents: 1 Ball Joint; 1 Nut; 3 Bolts; 3 Washers; 1 C Clip
  • Stud Thread Diameter: 14 MM
  • Stud Type: Tapered
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.5
TRW : JBJ7563 Ball Joint
TRW : JBJ7562 Ball Joint
DELPHI : TC3402 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 3.543
  • Height (MM): 90.0
  • Length (MM): 105
  • Material: Steel
  • Maximum Outside Diameter (IN): 3.622
  • Maximum Outside Diameter (MM): 92.0
  • Mount Plate Included: No
  • Mounting Bolt Head Diameter (IN): 0.709
  • Mounting Bolt Head Diameter (MM): 18.0
  • Mounting Bolt Length (IN): 1.378
  • Mounting Bolt Length (MM): 35.0
  • Mounting Bolt Shank Diameter (IN): 0.472
  • Mounting Bolt Shank Diameter (MM): 12.0
  • Mounting Bolt Thread Length (IN): 0.906
  • Mounting Bolt Thread Length (MM): 23.0
  • Mounting Bolt Thread Pitch (MM): 1.25
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Nuts Included: Yes
  • Position(s): Front Left
  • Stud Tapered End 1 Diameter (in): 0.827
  • Stud Tapered End 1 Diameter (mm): 21.0
  • Stud Tapered End 2 Diameter (in): 0.689
  • Stud Tapered End 2 Diameter (mm): 17.5
  • Stud Thread Length (IN): 0.748
  • Stud Thread Length (MM): 19.0
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Type: Premium
  • Washers Included: Yes
  • Width (MM): 92.0
DELPHI : TC3403 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 3.543
  • Height (MM): 90.0
  • Length (MM): 105
  • Material: Steel
  • Maximum Outside Diameter (IN): 3.622
  • Maximum Outside Diameter (MM): 92.0
  • Mount Plate Included: No
  • Mounting Bolt Head Diameter (IN): 0.862
  • Mounting Bolt Head Diameter (MM): 21.9
  • Mounting Bolt Length (IN): 1.476
  • Mounting Bolt Length (MM): 37.5
  • Mounting Bolt Shank Diameter (IN): 0.472
  • Mounting Bolt Shank Diameter (MM): 12.0
  • Mounting Bolt Thread Length (IN): 1.181
  • Mounting Bolt Thread Length (MM): 30.0
  • Mounting Bolt Thread Pitch (MM): 1.25
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Nuts Included: Yes
  • Position(s): Front Right
  • Stud Tapered End 1 Diameter (in): 0.827
  • Stud Tapered End 1 Diameter (mm): 21.0
  • Stud Tapered End 2 Diameter (in): 0.689
  • Stud Tapered End 2 Diameter (mm): 17.5
  • Stud Thread Length (IN): 0.748
  • Stud Thread Length (MM): 19.0
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Type: Premium
  • Washers Included: Yes
  • Width (MM): 92.0
ACDelco : 45D2398 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greasable: No
  • Material: Steel
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Stud Type: Threaded
  • Type: Bolt On
ACDelco : 45D2397 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greasable: No
  • Material: Steel
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Stud Type: Threaded
  • Type: Bolt On
MEVOTECH : MS60501 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
MEVOTECH : MS60500 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
MOOG : K500070 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 2
  • Mounting Type: 3 BOLT
MOOG : K500069 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 2
  • Mounting Type: 3 BOLT
QUICK STEER : K500069 Ball Joint
QUICK STEER : K500070 Ball Joint
FVP : BJ59124 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 1
  • Mounting Type: Bolt On
  • Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Bolt; 2 Nuts
  • Stud Thread Diameter: 14 MM
  • Stud Type: Taper
  • Suspension Grade Type: Standard
  • Thread Pitch: 2
MEVOTECH : GS60500 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Paint
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
MEVOTECH : GS60501 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Paint
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
TRW : JBJ7569 Ball Joint
DELPHI : TC2627 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Color: Gray
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 3.327
  • Height (MM): 87.0
  • Material: Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040
  • Maximum Outside Diameter (IN): 1.063
  • Maximum Outside Diameter (MM): 27.0
  • Mount Plate Included: No
  • Mounting Bolt Head Diameter (IN): 1.047
  • Mounting Bolt Head Diameter (MM): 26.6
  • Mounting Bolt Length (IN): 0.787
  • Mounting Bolt Length (MM): 20.0
  • Mounting Bolt Shank Diameter (MM): 12.0
  • Mounting Bolt Thread Length (MM): 18.0
  • Mounting Bolt Thread Pitch (MM): 1.25
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Nuts Included: Yes
  • Position(s): Front Lower, Front. For the position specific to your vehicle, refer to the Application tab.
  • Stud Taper Per Foot (IN): 0.125
  • Stud Tapered End 1 Diameter (in): 0.787
  • Stud Tapered End 1 Diameter (mm): 20.0
  • Stud Tapered End 2 Diameter (in): 0.685
  • Stud Tapered End 2 Diameter (mm): 17.4
  • Stud Thread Diameter (MM): 14.0
  • Stud Thread Length (IN): 0.866
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Washers Included: No
  • Width (MM): 112.0
  • Wrench Size (mm): 16.0
SUSPENSIA : X17BJ1631 Ball Joint
  • Bolts Included: Yes
  • Mounting Hardware Included: Yes
CENTRIC : 61040007 Ball Joint
  • Country of Origin: TW
  • Package Dimensions: 3.8 x 3.2 x 3.5 inches
  • Package Quantity: 1
  • Package Weight: 1.7 lb
  • Remanufactured Part: N
  • UPC: 805890776628
MOOG : K500103 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: No
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: 3 BOLT
MEVOTECH : MS60505 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
ACDelco : 45D2389 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greasable: No
  • Material: Steel
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Stud Type: Threaded
  • Type: Bolt On
SKP : SK500103 Ball Joint
QUICK STEER : K500103 Ball Joint
DELPHI : TC3803 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 3.307
  • Height (MM): 84.0
  • Length (MM): 98
  • Material: Steel
  • Maximum Outside Diameter (IN): 3.583
  • Maximum Outside Diameter (MM): 91.0
  • Mount Plate Included: No
  • Mounting Bolt Head Diameter (IN): 0.709
  • Mounting Bolt Head Diameter (MM): 18.0
  • Mounting Bolt Length (IN): 1.378
  • Mounting Bolt Length (MM): 35.0
  • Mounting Bolt Thread Length (IN): 0.906
  • Mounting Bolt Thread Length (MM): 23.0
  • Mounting Bolt Thread Pitch (MM): 1.25
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Tapered End 1 Diameter (in): 0.752
  • Stud Tapered End 1 Diameter (mm): 19.1
  • Stud Tapered End 2 Diameter (in): 0.614
  • Stud Tapered End 2 Diameter (mm): 15.6
  • Stud Thread Length (IN): 0.791
  • Stud Thread Length (MM): 20.1
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Type: Premium
  • Washers Included: No
  • Width (MM): 91.0
MEVOTECH : MS60525 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
MOOG : K100199 Ball Joint
  • Adjustable: Yes
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Mounting Hardware Included: Yes
ACDelco : 45D10725 Ball Joint
  • Ball Joint Assembly: Yes
SUSPENSIA : X17BJ0365 Ball Joint
  • Material: Steel
MEVOTECH : MS60509 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Stud Type: Threaded
MEVOTECH : MS60522 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Stud Type: Threaded
DELPHI : TC8051 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Color: Black
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Country of Origin: CN
  • Distance Between Mounting Holes: 66.0 MM
  • Dust Boot Included: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Grease Fitting Included: No
  • Greaseable: No
  • Height: 0.83 IN
  • Item Grade: Standard Replacement
  • Length: 113 MM
  • Material: Steel
  • Mount Plate Included: No
  • Mounting Bolt Head Diameter: 25.0 MM
  • Mounting Bolt Length: 32.1 MM
  • Mounting Bolt Thread Length: 20.0 MM
  • Mounting Bolt Thread Pitch: 1.25 MM
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 1
  • Mounting Type: Ring
  • Nuts Included: Yes
  • Package Dimensions: 3.97 x 3.97 x 4.84 inches
  • Package Quantity: 1
  • Package Weight: 1.77 lb
  • Position(s): Front Lower
  • Stud Taper Per Foot: 0.06 IN
  • Stud Tapered End 1 Diameter: 16.85 MM
  • Stud Tapered End 2 Diameter: 20.0 MM
  • Stud Thread Diameter: 14.0 MM
  • Stud Thread Length: 21.0 MM
  • Stud Thread Pitch: 2.0 MM
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • UPC: 689604367346
  • Washers Included: No
  • Width: 91.9 MM
SKP : SK500128 Ball Joint
ULTRA-POWER : K500128 Ball Joint
ULTRA-POWER : K500081 Ball Joint
ULTRA-POWER : K90492 Ball Joint
QUICK STEER : K500289 Ball Joint
FVP : BJ59016 Ball Joint
  • Adjustable: No
  • Attachment Type: Press In
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot Material: Polychloroprene
  • Greaseable: No
  • Housing Press Fit Diameter: 35.5 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Package Contents: 1 Ball Joint; 1 Boot; 1 Castle Nut; 1 Cotter Pin
  • Stud Thread Diameter: 0.5"
  • Stud Type: Taper
  • Suspension Grade Type: Standard
  • Thread Pitch: M1.25
MEVOTECH : GK90469 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Dust Boot: Yes
  • Finish: Paint
  • Mounting Type: Press In
MEVOTECH : GK90492 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Dust Boot: Yes
  • Finish: Paint
  • Mounting Type: Press In
FVP : BJ59165 Ball Joint
  • Adjustable: No
  • Attachment Type: Pinch Bolt
  • Bearing Material: Polymer
  • Bolts/Studs Included: No
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 48.55 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press
  • Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin
  • Stud Thread Diameter: 14 MM
  • Stud Type: Pinch
  • Suspension Grade Type: Standard
  • Thread Pitch: M1.5
QUICK STEER : K500128 Ball Joint
FVP : B90492 Ball Joint
  • Adjustable: Yes
  • Adjustment Range: 1 deg
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greaseable: No
  • Locking Nut Included: Yes
  • Material: Steel
  • Maximum Outside Diameter: 47.5 mm
  • Mounting Hole Quantity: 0
  • Mounting Type: Bolt On
  • Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Lock Nut; 1 Cotter Pin; 1 Washer
  • Stud Thread Diameter: 10 mm
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.25
TRW : JBJ927 Ball Joint
SUSPENSIA : X17BJ1609 Ball Joint
  • Mounting Hardware Included: Yes
TRW : JBJ133 Ball Joint
DELPHI : TC7831 Ball Joint
  • Ball Joint Assembly: No
  • Castle Nut Included: Yes
  • Color: Gray
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Grease Fitting Included: No
  • Material: Steel
  • Maximum Outside Diameter (IN): 1.73
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Position(s): Front Upper
  • Stud Type: Threaded
  • Tapered Stud: Yes
SUSPENSIA : X17BJ1610 Ball Joint
  • Mounting Hardware Included: Yes
TRW : JBJ7627 Ball Joint
DELPHI : TC2629 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 2.165
  • Height (MM): 55.0
  • Length (MM): 100
  • Material: Steel
  • Maximum Outside Diameter (IN): 2.165
  • Maximum Outside Diameter (MM): 55.0
  • Mount Plate Included: No
  • Mounting Hardware Included: Yes
  • Mounting Type: Pressed
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Tapered End 1 Diameter (in): 0.866
  • Stud Tapered End 1 Diameter (mm): 22.0
  • Stud Tapered End 2 Diameter (in): 0.78
  • Stud Tapered End 2 Diameter (mm): 19.8
  • Stud Thread Length (IN): 0.701
  • Stud Thread Length (MM): 17.8
  • Stud Thread Pitch (mm): 1.5
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Type: Premium
  • Washers Included: No
  • Width (MM): 55.0
MOOG : K500128 Ball Joint
  • Adjustable: Yes
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press-in
MOOG : K500289 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: No
  • Mounting Hardware Included: Yes
MEVOTECH : MK90469 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
MEVOTECH : MS60503 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Stud Type: Threaded
ACDelco : 45D2402 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greasable: No
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Stud Type: Grooved
  • Type: Press In
DELPHI : TC7658 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Color: Black
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Rubber
  • Greasable: Yes
  • Material: Steel
  • Maximum Outside Diameter (IN): 1.874
  • Maximum Outside Diameter (MM): 47.6
  • Mount Plate Included: No
  • Mounting Type: Bolt In
  • Nuts Included: Yes
  • Position(s): Front Upper
  • Stud Thread Diameter (MM): 10.0
  • Stud Thread Length (IN): 0.374
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: No
  • Washers Included: Yes
MEVOTECH : MK90492 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Stud Type: Threaded
MOOG : K90492 Ball Joint
  • Adjustable: Yes
  • Greasable: No
  • Mounting Hardware Included: Yes
ACDelco : 45K15001 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot: Yes
  • Greasable: No
  • Material: Steel
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Stud Type: Threaded
  • Type: Caster Camber
MEVOTECH : TXK90336 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Repel-TEK™
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Pre Greased: Yes
  • Stud Type: Threaded
SUSPENSIA : X17BJ1641 Ball Joint
  • Bolts Included: Yes
  • Mounting Hardware Included: Yes
TRW : JBJ1151 Ball Joint
CENTRIC : 61040000 Ball Joint
  • Adjustable: No
  • Bushing Material: Poly
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Greasable: No
  • Grease Fitting Included: No
  • Mount Plate Included: No
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: No
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt-on
  • Nuts Included: No
  • Stud Tapered End 1 Diameter: 15.5 mm
  • Stud Type: Threaded
  • Tapered Stud: Yes
  • Washers Included: No
DELPHI : TC3679 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Color: Gray
  • Cotter Pin Hole: No
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 5.217
  • Height (MM): 132.5
  • Length (MM): 60
  • Material: Ball Material - Alloy Steel SAE 5140, Housing Material - Carbon Steel SAE 1040
  • Mount Plate Included: No
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Pressed
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Tapered End 1 Diameter (in): 0.717
  • Stud Tapered End 1 Diameter (mm): 18.2
  • Stud Tapered End 2 Diameter (in): 0.941
  • Stud Tapered End 2 Diameter (mm): 23.9
  • Stud Thread Diameter (MM): 16.0
  • Stud Thread Length (IN): 1.24
  • Stud Thread Length (MM): 31.5
  • Stud Thread Pitch (mm): 1.5
  • Tapered Stud: Yes
  • Washers Included: No
  • Width (MM): 60.0
MOOG : K500234 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Material: Neoprene
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt-on
  • Suspension Grade Type: Standard
MEVOTECH : MS60517 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
FVP : BJ59405 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 0
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Package Contents: 1 Ball Joint; 2 Bolts; 1 Nut
  • Stud Thread Diameter: 14 MM
  • Stud Type: Tapered
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.5
MEVOTECH : GS60517 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Paint
  • Mounting Hardware Included: Yes
  • Mounting Type: Bolt In
  • Pre Greased: Yes
  • Stud Type: Threaded
DELPHI : TC7467 Ball Joint
  • Position(s): Rear Upper
DELPHI : TC6948 Ball Joint
  • Adjustable: Yes
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Color: Silver
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Country of Origin: US
  • Distance Between Mounting Holes: 69.85 MM
  • Dust Boot Included: Yes
  • Dust Boot Material: Chloroprene Rubber
  • Grease Fitting Included: Yes
  • Greaseable: Yes
  • Height: 100.0 MM
  • Length: 100 MM
  • Material: Steel
  • Mount Plate Included: Yes
  • Mounting Bolt Length: 40.0 MM
  • Mounting Bolt Shank Diameter: 12.0 MM
  • Mounting Bolt Thread Diameter: 12.0 MM
  • Mounting Bolt Thread Length: 38.1 MM
  • Mounting Bolt Thread Pitch: 1.25 MM
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt In
  • Nuts Included: Yes
  • Package Dimensions: 3.97 x 3.97 x 4.84 inches
  • Package Quantity: 1
  • Package Weight: 1.58 lb
  • Position(s): Front Lower
  • Stud Thread Diameter: 14.0 MM
  • Stud Thread Length: 22.35 MM
  • Stud Thread Pitch: 1.5 MM
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • UPC: 689604381670
  • Washers Included: No
  • Width: 100.0 MM
  • Wrench Size: 19.0 MM
SUSPENSIA : X17BJ6863 Ball Joint
  • Bolts Included: Yes
  • Mounting Hardware Included: Yes
SUSPENSIA : X17BJ6862 Ball Joint
  • Bolts Included: Yes
  • Mounting Hardware Included: Yes
DELPHI : TC3805 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bushings Included: No
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Dust Boot Material: Choloroprene Rubber (CR)
  • Greasable: No
  • Grease Fitting Included: No
  • Height (IN): 3.268
  • Height (MM): 83.0
  • Length (MM): 95
  • Material: Steel
  • Maximum Outside Diameter (IN): 3.622
  • Maximum Outside Diameter (MM): 92.0
  • Mount Plate Included: No
  • Mounting Bolt Head Diameter (IN): 0.709
  • Mounting Bolt Head Diameter (MM): 18.0
  • Mounting Bolt Length (IN): 1.378
  • Mounting Bolt Length (MM): 35.0
  • Mounting Bolt Thread Length (IN): 0.906
  • Mounting Bolt Thread Length (MM): 23.0
  • Mounting Bolt Thread Pitch (MM): 1.25
  • Mounting Bolts Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 3
  • Mounting Type: Bolt On
  • Nuts Included: Yes
  • Position(s): Front Lower
  • Stud Tapered End 1 Diameter (in): 0.669
  • Stud Tapered End 1 Diameter (mm): 17.0
  • Stud Tapered End 2 Diameter (in): 0.547
  • Stud Tapered End 2 Diameter (mm): 13.9
  • Stud Thread Length (IN): 0.886
  • Stud Thread Length (MM): 22.5
  • Stud Thread Pitch (mm): 1.25
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Tapered Stud: Yes
  • Type: Premium
  • Washers Included: Yes
  • Width (MM): 92.0
MOOG : K500366 Ball Joint
  • Country of Origin: MX
  • Package Dimensions: 4.00 x 3.25 x 5.25 inches
  • Package Quantity: 1
  • Package Weight: 1.5 lb
  • UPC: 080066705323
MOOG : K500415 Ball Joint
  • Country of Origin: MX
  • Package Dimensions: 12.25 x 5.75 x 3.50 inches
  • Package Quantity: 1
  • Package Weight: 0.915 lb
  • UPC: 080066717845
ULTRA-POWER : K80997 Ball Joint
SUSPENSIA : X17BJ0419 Ball Joint
MOOG : K500394 Ball Joint
  • Country of Origin: TW
  • Package Dimensions: 3.25 x 1.75 x 4.00 inches
  • Package Quantity: 1
  • Package Weight: 0.507 lb
  • UPC: 080066714035
MAS : BJ59455 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot Material: Rubber
  • Greasable: No
  • Housing Press Fit Diameter: 43.5 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press In
  • Package Contents: 1 Ball Joint; 1 Nut
  • Stud Thread Diameter: 14 MM
  • Stud Type: Tapered
  • Suspension Grade Type: Standard
  • Thread Pitch: M2.0
FVP : BJ59455 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: No
  • Cotter Pin Hole: No
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 43.5 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Pressed
  • Package Contents: 1 Ball Joint; 1 Nut
  • Stud Thread Diameter: 14 MM
  • Stud Type: Tapered
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.5
SKP : SK500315 Ball Joint
MEVOTECH : GS60511 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Mounting Type: Press In
  • Stud Type: Threaded
SUSPENSIA : X17BJ0335 Ball Joint
  • Mounting Hardware Included: Yes
MOOG : K500315 Ball Joint
  • Adjustable: No
  • Cotter Pin Hole: Yes
  • Greasable: Yes
  • Mounting Hardware Included: Yes
ACDelco : 45D10712 Ball Joint
  • Type: Front Lower
MEVOTECH : MS60511 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Bearing Type: Sintered Metal
  • Castle Nut Included: Yes
  • Cotter Pin Included: Yes
  • Dust Boot: Yes
  • Finish: Corrosion Resistant
  • Greasable: Yes
  • Grease Fitting Included: Yes
  • Mounting Hardware Included: Yes
  • Mounting Type: Press In
  • Stud Type: Threaded
CENTRIC : 61140022 Ball Joint
  • Country of Origin: CN
  • Package Dimensions: 3.1 x 3.8 x 3.5 inches
  • Package Quantity: 1
  • Package Weight: 1.05 lb
  • Remanufactured Part: N
  • UPC: 805890914426
FVP : BJ59115 Ball Joint
  • Adjustable: No
  • Attachment Type: Taper
  • Bearing Material: Polymer
  • Bolts/Studs Included: Yes
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 43.15 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Pressed
  • Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin
  • Stud Thread Diameter: 12 mm
  • Stud Type: Tapered
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.25
SUSPENSIA : X17BJ6648 Ball Joint
  • Mounting Hardware Included: No
SKP : SK9643 Ball Joint
ULTRA-POWER : K90336 Ball Joint
FVP : B9643 Ball Joint
  • Adjustable: No
  • Attachment Type: Threaded
  • Bearing Material: Polymer
  • Bolts/Studs Included: No
  • Castle Nut Included: Yes
  • Cotter Pin Hole: Yes
  • Dust Boot Material: Rubber
  • Greaseable: No
  • Housing Press Fit Diameter: 42 mm
  • Material: Steel
  • Mounting Hardware Included: Yes
  • Mounting Hole Quantity: 0
  • Mounting Type: Press
  • Package Contents: 1 Ball Joint; 1 Castle Nut; 1 Cotter Pin; 1 Snap Ring
  • Stud Thread Diameter: 12 mm
  • Stud Type: Threaded
  • Suspension Grade Type: Standard
  • Thread Pitch: 1.25
MEVOTECH : GK9643 Ball Joint
  • Adjustable: No
  • Ball Joint Assembly: Yes
  • Dust Boot: Yes
  • Finish: Paint
  • Mounting Type: Press In
308
条记录,分
4
页显示
按品牌拼音首字母查找:

      尺寸/参数

      标注 名称 尺寸范围 单位
          

      联系客服

      客服电话:020-36390347